Nokia 7210 Configuration Manual page 137

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Figure 5
See
3HE 17358 AAAB TQZZA
• Figure 5 shows an overview of the system initialization process and the multiple
options available to initialize the system.
• Figure 6 shows the system initialization process in manual mode to create a new
BOF or edit an existing BOF.
• Figure 7 shows the system initialization process in auto-init mode using partially
configured BOF parameters.
• Figure 8 shows the system initialization process using auto-init mode to retrieve
the BOF from the network.
• Figure 9 shows the process for booting up the TiMOS (both.tim) image.
System Initialization: Bootstrap Process Overview
R
Restart
Yes
A
Auto-init B
mode
Boot up
Configure IP on uplink port
Check for
primary,
secondary, and
tertiary image
No
R
Restart
Persistence for more information on persistence of the index files.
Use subject to Terms available at: www.nokia.com
Power On
wait period for
user intervention
CLI user Yes
connected?
No
Booting for first time?
Or
Booting after reset to
factory default?
No
Read BOF file for IP
address and static route
Was config file
Yes
download
successful?
No
Booting for first time?
Or
Booting after reset to
factory default?
Yes
Reset to factory default;
hard reboot
© 2021 Nokia.
wait is
configurable
in BOF
Manual mode
M
TiMOS
boot up
Check for primary,
secondary, and
tertiary image
Download
Was image
persistence file,
download
if persist on
successful?
is configured
Boot Options
T
Yes
No
sw0451
137