Nokia 7210 Configuration Manual page 555

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Note: On the 7210 SAS-Sx 10/100GE, the sum of resources, also called slices, allocated
to SAP ingress policies using the config>system>resource-profile>ingress-internal-
tcam>qos-sap-ingress-resource command and to access ingress policies using the
config>system>resource-profile>ingress-internal-tcam>qos-access-port-ingress-
resource command must not exceed 3.
The no form of this command reverts to the default value.
Default qos-access-port-ingress-resource 0
Parameters num-resources — Specifies the amount of resources allocated to QoS access port
Table 60
qos-network-ingress-resource
Syntax qos-network-ingress-resource num-resources
no qos-network-ingress-resource
Context config>system>res-prof>ing-internal-tcam
Platforms 7210 SAS-R6 and 7210 SAS-R12
Description This command removes resources allocated to port-based and IP interface-based network
ingress QoS policies associated with network and hybrid ports, and makes the resources
available for other features that share the ingress-internal-tcam resource pool (for example,
SAP ingress classification and ingress ACLs).
3HE 17358 AAAB TQZZA
ingress policies.
Values Table 60
access port ingress policies per 7210 SAS platform.
Number of Resources Allocated to QoS Access Port Ingress
Policies on 7210 SAS Platforms
7210 SAS Platform
7210 SAS-Mxp
7210 SAS-R6 IMM-b
7210 SAS-R6 IMM-c
7210 SAS-R12
7210 SAS-Sx/S 1/10GE
7210 SAS-Sx 10/100GE
Use subject to Terms available at: www.nokia.com
lists the number of resources that can be allocated to QoS
Number of Resources
0 to 4
0 to 3
0 to 1
0 to 3
0 to 7
0 to 2
© 2021 Nokia.
System Management
555