Nokia 7210 Configuration Manual page 206

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

Boot Options
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description
This command enables speed and duplex auto-negotiation on the management Ethernet port
in the running configuration and the BOF.
The no form of this command disables the auto-negotiate feature on this port.
Default
eth-mgmt-autoneg
eth-mgmt-disabled
Syntax
[no] eth-mgmt-disabled
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description
This command allows the user to enable or disable the out-of-band management Ethernet
port for use during boot up.
The no form of this command enables the port.
Default
eth-mgmt-disabled
eth-mgmt-duplex
Syntax
eth-mgmt-duplex {full | half}
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description
This command configures the duplex mode of the management Ethernet port when auto-
negotiation is disabled in the running configuration and the BOF.
This configuration command allows for the configuration of the duplex mode of the Ethernet
port. If the port is configured to auto-negotiate, this parameter will be ignored.
Default
eth-mgmt-duplex full
Parameters
full — Keyword to set the link to full duplex mode.
half — Keyword to set the link to half duplex mode.
206
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 17358 AAAB TQZZA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents