7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Description
This command configures a weekly periodic interval in the time range.
This command configures the start and end of a schedule for the same day every week; for
example, every Friday. The start and end dates must be the same. The resolution must be at
least one minute apart, for example, start at 11:00 and end at 11:01. A start time and end time
of 11:00 is invalid.
The no form of this command removes the weekly parameters from the configuration.
Default
no time-range
Parameters
start start-time-in-week — Specifies the start day and time of the week.
end end-time-in-week — Specifies the end day and time of the week.
Time of Day Commands
tod-suite
Syntax
tod-suite tod-suite name create
no tod-suite
Context
config>system>cron
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
Commands in this context modify time of day (TOD) parameters.
Default
no tod-suite
3HE 17358 AAAB TQZZA
Values
start-time-in-week — day,hh:mm
day — sun, mon, tue, wed, thu, fri, sat
sunday, monday, tuesday, wednesday, thursday, friday,
saturday
hh — 0 to 23
mm — 0 to 59
Values
end-time-in-week — day,hh:mm
day — sun, mon, tue, wed, thu, fri, sat
sunday, monday, tuesday, wednesday, thursday, friday,
saturday
hh — 0 to 23
mm — 0 to 59
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
453