Configuration Notes For 7210 Sas-Sx 1/10Ge, 7210 Sas-S 1/10Ge, 7210 Sas-Sx 10/100Ge, And 7210 Sas-Mxp - Nokia 7210 Configuration Manual

Boot Options
7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp Boot Loader
Table 22
Actions for chassis-role and host-type Parameters (Continued)
Boot Parameter:
chassis-role
satellite
4.2.3 Configuration Notes for 7210 SAS-Sx 1/10GE,
The following BOF configuration guidelines apply to these platforms.
144
BOF Parameter:
host-type
satellites
standalone
none
(host-type is not set
to any value
explicitly)
7210 SAS-S 1/10GE, 7210 SAS-Sx 10/100GE, and
7210 SAS-Mxp
• When the chassis-role parameter for the node is set to satellite, DHCP
requests are sent out of the following ports:
- ports 1/1/25, 1/1/26 (10GE ports) on the 24-port 7210 SAS-Sx 1/10GE,
7210 SAS-S 1/10GE, and 7210 SAS-Mxp variants
- ports 1/1/49, 1/1/50 (10GE ports) on the 48-port 7210 SAS-Sx 1/10GE,
7210 SAS-S 1/10GE variants
- ports 1/1/65, 1/1/66 (100GE ports), and ports 1/1/1, 1/1/2 (which are 10GE
ports) on the 7210 SAS-Sx 10/100GE 64SFP+ 4CFP4 variant
- ports 1/1/c1/1 and 1/1/c2/1, and 10 GE ports 1/1/1 and 1/1/2 on the
7210 SAS-Sx 10/100GE 64SFP+ 4QSFP28 variant
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Boot Loader Action
• The chassis-role value is unchanged from satellite.
• The system boots up successfully in satellite mode.
• On subsequent reboots, the system will continue to boot up in
satellite mode.
The boot loader detects a mismatch and returns an error. Depending
on the context of the boot loader, it will take one of the following
actions.
• If the boot loader is in auto-init, it will retry auto-init to fetch a new
BOF with the correct value for host-type.
• If the boot loader was interrupted to configure the BOF
parameters manually, it will go back to provide an option for the
user to change host-type to the correct value.
Not recommended
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA