Nokia 7210 Configuration Manual page 524

System Management
mac-ipv6-64bit-match-enable
Syntax [no] mac-ipv6-64bit-match-enable num-resources
Context configure>system>resource-profile>egress-internal-tcam>acl-sap-egress
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command allocates maximum resources for use by egress filter policies using MAC
criteria or IPv6 criteria using only the upper 64-bits of the IPv6 addresses. The resources
allocated are allocated on a first-come-first-serve basis among service entities (for example,
SAP and IP interface) using IPv6 64-bit and MAC criteria egress filter policies.
The resources cannot be shared with any other egress filter policies that specify other match
criteria. Refer to the 7210 SAS-M, T, R6, R12, Mxp, Sx, S Router Configuration Guide for
more information on resource allocation and fields available for use.
The no form of this command specifies that the software does not allocate any resources for
use by egress filter policies using MAC or IPv6 64-bit criteria. If no resources are allocated
for use, the software fails all attempts to associate a service entity (for example SAP and IP
interface) with a filter policy using this match criteria.
Default no mac-ipv6-64bit-match-enable
Parameters num-resources — Specifies the maximum amount of resources for use by this filter
Table 47
524
match criteria. A minimum value of 2 (indicating two chunks of resources) must be
allocated to use this match-criteria. If not, association of a policy with mac and ipv6
64bit criteria to a SAP will fail. It is mutually exclusive to use of SAP egress aggregate
meter.
Values Table 47
Number of Resources Available for MAC-IPv6-64Bit-Match-
Enable
Platforms
7210 SAS-M (per node)
7210 SAS-T access-uplink mode (per node)
7210 SAS-T network mode (per node)
7210 SAS-Sx 1/10GE (per node)
(standalone)
7210 SAS-Sx 1/10GE (standalone-VC)
7210 SAS-S 1/10GE (per node) (standalone)
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
lists the parameter values.
© 2021 Nokia.
Configuration Guide
Min value Max value
(per node) (per node)
0 2
0 2
0 2
0 2
0 2
0 2
3HE 17358 AAAB TQZZA
Default
Values
0
0
0
0
0
0