Nokia 7210 Configuration Manual page 540

System Management
Parameters num-resources — Specifies the maximum amount of resources for use by this match
Table 52
ipv4-match-enable
Syntax ipv4-match-enable num-resources
no ipv4-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
540
criteria.
If the user specifies max, the software allocates one chunk when the first SAP is
associated with an ingress filter policy using this match criteria. It continues to
allocate resources to SAPs associated with an ingress filter policy using this criteria,
as long as the total amount of resources allocated does not exceed the resources
allocated to ingress filter policies (configured with the config system resource-
profile ingress-internal-tcam qos-sap-ingress-resource command) and chunks
are available for use.
Values Table 52
Number of Resources Available for IPv4-MAC-Match-Enable
Platforms
7210 SAS-M (per node)
7210 SAS-T access-uplink mode (per node)
7210 SAS-T network mode (per node)
7210 SAS-R6 (per IMMv1)
7210 SAS-R6 and 7210 SAS-R12 (per IMMv2)
7210 SAS-R6 and 7210 SAS-R12 (per IMM-c)
7210 SAS-Mxp (per node)
7210 SAS-Sx 1/10GE (per node) (standalone)
7210 SAS-Sx 1/10GE (standalone-VC)
7210 SAS-S 1/10GE (per node) (standalone)
7210 SAS-S 1/10GE (standalone-VC)
7210 SAS-Sx 10/100GE (per node)
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
lists the parameter values.
© 2021 Nokia.
Configuration Guide
Min value Max value
(per node) (per node)
0 10
0 7
0 6
0 7
0 12
0 10
0 10
0 7
0 6
0 7
0 6
0 3
3HE 17358 AAAB TQZZA
Default
Values
max
max
max
max
max
max
max
max
max
max
max
max