Nokia 7210 Configuration Manual page 715

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Loading VxRom image .......
Board Serial Number is 'NS1722T0086'
Total Memory: 2GB
TiMOS-V-11.0.B1-6 bootrom/hops Nokia SAS-S 24T4SFP+ 7210 Copyright (c) 2000-
2018 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Thu Dec 6 15:21:48 IST 2018 by sasbuild in /home/sasbuild/11.0B1/panos/main
Searching for boot.tim on local drives:
Attempting to load file cf1:/boot.tim
Version L-11.0.B1-21, Wed Feb 27 12:30:02 IST 2019 by sasbuild in /home/sasbuild/
11.0B1/panos/main
text:(13790784-->40910320) + data:(3160736-->19576100)
Starting at 0x18000000...
Total Memory: 2GB
TiMOS-L-11.0.B1-21 boot/hops Nokia SAS-S 24T4SFP+ 7210 Copyright (c) 2000-
2019 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Feb 27 12:30:02 IST 2019 by sasbuild in /home/sasbuild/11.0B1/panos/
main
TiMOS BOOT LOADER
Time from clock is SAT JAN 01 00:15:24 2000 UTC
Switching serial output to sync mode...
Chassis-role is set to : standalone
Step 3. The system lists the default settings and the following console output is
Looking for cf1:/bof.cfg ... OK, reading
Contents of Boot Options File on cf1:
#eth-mgmt Port Settings:
#uplinkA Port Settings:
#System Settings:
Hit a key within 3 seconds to change boot parameters...
Step 4. At the prompt, press any key to initiate boot parameter updates.
Enter password to edit the Boot Options File
Or CTRL-D to exit the prompt
3HE 17358 AAAB TQZZA
Chassis Type: 0xa
Chassis Type: 0xa
displayed.
eth-mgmt-disabled
uplinkA-port 1/1/27
no uplinkA-autoneg
uplinkA-duplex full
uplinkA-speed 10000
uplinkB-address 0
uplinkB-vlan 0
wait 3
persist off
console-speed 115200
no console-disabled
The following console output is displayed.
Use subject to Terms available at: www.nokia.com
Card Type: 0x14
Card Type: 0x14
done
© 2021 Nokia.
Appendix: 7210 SAS Boot Procedures
715