Table 59 Number Of Resources Available For Ipv6-Ipv4-Match-Enable - Nokia 7210 Configuration Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Table 59
ip-mpls-protocols
Syntax ip-mpls-protocols num-resources
no ip-mpls-protocols
Context config>system>resource-profile>ing-internal-tcam
Platforms 7210 SAS-Mxp
Description This command configures an additional slice from the ingress-internal-tcam resource pool for
use by the IP and MPLS protocols.
On boot up, by default, the software allocates a single slice of entries from the ingress-
internal-tcam resource pool for use by the IP and MPLS control protocols. Entries from that
slice are allocated to the following protocols on a first-come-first-serve basis when the user
enables the protocol: OSPFv2, OSPFv3, BGP, IS-IS, LDP, RSVP, VRRP, MC-LAG,
VRRPv3, PCEP, PIM, IGMP, DHCP, DHCPv6, and PTP.
3HE 17358 AAAB TQZZA
Number of Resources Available for IPv6-IPv4-Match-Enable
Platforms
7210 SAS-M (per node)
7210 SAS-T Access-Uplink mode (per node)
7210 SAS-T Network Mode (per node)
7210 SAS-R6 (per IMMv1)
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
7210 SAS-R6 and 7210 SAS-R12 (per IMM-
c)
7210 SAS-Mxp (per node)
7210 SAS-Sx 1/10GE (per node)
(standalone)
7210 SAS-Sx 1/10GE (standalone-VC)
7210 SAS-S 1/10GE (per node) (standalone)
7210 SAS-S 1/10GE (standalone-VC)
7210 SAS-Sx 10/100GE (per node)
Use subject to Terms available at: www.nokia.com
Min value
(per node)
0
0
0
0
0
0
0
0
0
0
0
0
© 2021 Nokia.
System Management
Max value Default
(per node) Values
10 0
7 0
6 0
7 max
12 max
10 max
10 0
7 0
6 0
7 0
6 0
3 0
553