Nokia 7210 Configuration Manual page 446

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

System Management
Using the weekday command as well as the day-of-month command will cause the script to
run twice. For example, consider that "today" is Monday January 1. If "Tuesday January 5" is
configured, the script will run on Tuesday (tomorrow) as well as January 5 (Friday).
See the month, weekday, hour, and
The no form of this command removes the specified day-of-month from the list.
Parameters
day-number — Specifies the day. The positive integers specify the day of the month
all — Specifies all days of the month.
end-time
Syntax
end-time [date | day-name] time
[no] end-time
Context
config>system>cron>sched
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command is used concurrently with type periodic or calendar. Using the type of
periodic, end-time determines at which interval the schedule will end. Using the type of
calendar, end-time determines on which date the schedule will end.
When no end-time is specified, the schedule runs forever.
Parameters
date — Specifies the date to schedule a command.
day-name — Specifies the day of the week to schedule a command.
time — Specifies the time of day to schedule a command.
hour
Syntax
hour {..hour-number [..hour-number] | all}
446
counting from the first of the month. The negative integers specify the day of the
month counting from the last day of the month. For example, configuring day-of-
month -5, 5 in a month that has 31 days will specify the schedule to occur on the 27th
and 5th of that month.
Integer values must map to a valid day for the month in question. For example,
February 30 is not a valid date.
Values
1 to 31, -31 to -1 (maximum 62 day-numbers)
Values
YYYY:MM:DD in year:month:day number format
Values
sunday, monday, tuesday, wednesday, thursday, friday, saturday
Values
hh:mm in hour:minute format
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
minute
commands for more information.
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents