System Management
Description
This command specifies the minute to schedule a command. Multiple minutes of the hour can
be specified. When multiple minutes are configured, each of them will cause the schedule to
occur. If a minute is configured, but no hour or day is configured, the event will not execute.
If a minute is configured without configuring the month, weekday, day-of-month and hour
commands, the event will not execute.
See the month, weekday, day-of-month, and
The no form of this command removes the specified minute from the configuration.
Parameters
minute-number — Specifies the minute to schedule a command.
all — Specifies all minutes.
month
Syntax
month {month-number [..month-number] | month-name [..month-name] | all}
no month
Context
config>system>cron>sched
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command specifies the month when the event should be executed. Multiple months can
be specified. When multiple months are configured, each of them will cause the schedule to
trigger. If a month is configured without configuring the weekday, day-of-month, hour, and
minute commands, the event will not execute.
See the weekday, day-of-month,
The no form of this command removes the specified month from the configuration.
Parameters
month-number — Specifies a month by number.
all — Specifies all months.
month-name — Specifies a month by name.
type
Syntax
type {schedule-type}
Context
config>system>cron>sched
448
Values
0 to 59 (maximum 60 minute-numbers)
Values
1 to 12 (maximum 12 month-numbers)
Values
january, february, march, april, may, june, july, august, september,
october, november, december (maximum 12 month names)
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
hour
commands for more information.
hour
and
minute
commands for more information.
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA