Nokia 7210 Configuration Manual page 621

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Table 75
3HE 17358 AAAB TQZZA
Output Fields: System PTP (Continued)
Label
Clock Priority2
Last Changed
PTP Recovery State
Frequency Offset
Frequency Source
Parent Clock
IP Address
Base
Parent Clock Id
Remote PTP Port
GM Clock Id
GM Clock Class
GM Clock Accuracy
GM Clock Variance
GM Clock Priority1
GM Clock Priority2
Time Information
Timescale
Current Time
Frequency
Traceable
Time Traceable
Time Source
Use subject to Terms available at: www.nokia.com
Description
Displays the second priority value of the local clock
This value is used by the BMCA to determine which clock should
provide timing for the network.
Displays the time the PTP port state last changed
Displays the clock recovery state: disabled, initial, acquiring,
phase-tracking, or locked
Displays the frequency offset of the PTP clock in parts per billion
Displays the configured clock frequency source
Displays the IP address
Displays the router ID that the parent clock IP address belongs to
Displays the parent clock identification
Displays the PTP port number at the remote end
Displays the grand master clock ID
Displays the grand master clock class
Displays the grand master clock accuracy designation
Displays the grand master clock variance
Displays the grand master clock priority1 designation
Displays the grand master clock priority2 designation
Displays the PTP timescale flag sent in the 1588 announce
message
Displays the last date and time recovered by the PTP time
recovery algorithm
Displays the frequency-traceable flag sent in the 1588 announce
message
Displays the time-traceable flag sent in the 1588 announce
message
Displays the time-source parameter sent in the 1588 announce
message
© 2021 Nokia.
System Management
621