Configuring System Monitoring Thresholds; Creating Events - Nokia 7210 Configuration Manual

System Management
When the debug sync-if-timing force-reference command is run, the current
system synchronous timing output is immediately referenced from the specified
reference input. The reference must be qualified.
Debug configurations are not saved between reboots.
Use the following syntax to reference the current system synchronous timing output
from the specifies reference input.
CLI Syntax:
The following example shows the command usage to reference the current system
synchronous timing output from the specifies reference input.
Example:

6.11.6 Configuring System Monitoring Thresholds

This section describes how to configure system monitoring thresholds.
6.11.6.1
The event command controls the generation and notification of threshold crossing
events configured with the alarm command. When a threshold crossing event is
triggered, the rmon event configuration optionally specifies whether an entry in the
RMON-MIB log table will be created to record the event. It can also specify whether
an SNMP notification (trap) will be generated for the event. There are two
notifications for threshold crossing events; a rising alarm and a falling alarm.ping-
address.
Creating an event entry in the RMON-MIB log table does not create a corresponding
entry in the 7210 SAS event logs. However, when the event is set to trap, the
generation of a rising alarm or falling alarm notification creates an entry in the event
logs and that is distributed to the configured log destinations, including console,
session, memory, file, syslog, or SNMP trap destination. The logger message
includes a rising or falling threshold crossing event indicator, the sample type
(absolute or delta), the sampled value, the threshold value, the rmon-alarm-id, the
associated rmon-event-id, and the sampled SNMP object identifier.
360
debug>sync-if-timing
force-reference {ref1 | ref2}
debug>sync-if-timing# force-reference

Creating Events

Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA