System Port Lag Mac Assignment Commands For 7210 Sas-Mxp Standalone, 7210 Sas-T, 7210 Sas-Sx 10/100Ge Standalone, And 7210 Sas-Sx/S 1/10Ge: Standalone And Standalone-Vc; System Alarm Contact Commands; System Synchronization Commands For 7210 Sas-M - Nokia 7210 Configuration Manual

System Management
6.12.1.13
config
6.12.1.14
config
6.12.1.15
config
376
System Port LAG MAC Assignment Commands for
7210 SAS-Mxp standalone, 7210 SAS-T, 7210 SAS-Sx 10/
100GE standalone, and 7210 SAS-Sx/S 1/10GE: standalone
and standalone-VC
— system
— port-lag-mac-assignment
— no port-lag-mac-assignment

System Alarm Contact Commands

— system
— alarm-contact-in-power
— alarm-contact-input
— [no] alarm-output-severity
— [no] clear-alarm-msg
— description
description-string
— normal-state
— [no] shutdown
— [no] trigger-alarm-msg

System Synchronization Commands for 7210 SAS-M

— system
— sync-if-timing
— abort
— begin
— commit
— ref-order
first second third
— no ref-order
— ptp
— ql-override
— no ql-override
— [no] shutdown
— ref1
— ql-override
— no ql-override
— [no] shutdown
— source-port
— no source-port
— ref2
— ql-override
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
[v1-enable]
{on|off}
alarm-contact-input-id
[critical | major | minor | none]
{alarm-msg-txt}
[open | closed]
{alarm-msg-txt}
{prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec}
{prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec | eec1 | eec2}
port-id
{prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec | eec1 | eec2}
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA