Nokia 7210 Configuration Manual page 702

Appendix: 7210 SAS Boot Procedures
Hit a key within 3 seconds to change boot parameters...
Step 4. At the prompt, press any key to initiate boot parameter updates.
Enter password to edit the Boot Options File
Or CTRL-D to exit the prompt
Waiting for 30 seconds to enter password
Password:
Step 5. At the prompt, enter the default password password.
You must supply some required Boot Options. At any prompt, you can type:
"restart" - restart the query mode.
"reboot"
"exit"
"diag"
"reset"
Press ENTER to begin, or 'flash' to enter firmware update...
Step 6. At the prompt, press Enter to initiate the update. The following console
Chassis-Role
-------------
Current chassis-role is : factory-default
You can change it to { satellite | standalone }.
Press ENTER to continue OR "edit" to change the chassis-role :
Chassis-role is set to factory-default, Do you wish to continue with this (yes/no) :
Step 7. At the prompt, enter yes. The following console output is displayed.
Software Location
-----------------
You must enter the URL of the TiMOS software.
The location can be on a Compact Flash device,
or on the network.
Here are some examples
cf1:/timos1.0R1
ftp://user:passwd@192.168.1.150/./timos1.0R1
tftp://192.168.1.150/./timos1.0R1
Software Image URL:
Step 8. At the prompt, enter the URL location of the software; for example, ftp://
702
wait 3
persist off
console-speed 115200
no console-disabled
The following console output is displayed.
The system accepts the password and the following console output is
displayed.
- reboot.
- boot with with existing values.
- enter the diag shell.
- reset the bof and reboot.
output is displayed.
<user>:<password>@10.10.170.22/./images/both.tim.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA