Nokia 7210 Configuration Manual page 721

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Step 30. At the prompt, press Enter. The following console output is displayed.
New Settings
------------
#eth-mgmt Port Settings:
#System Settings:
Do you want to overwrite cf1:/bof.cfg with the new settings? (yes/no):
Step 31. At the prompt, enter yes. The 7210 SAS device begins to boot with the new
Successfully saved the new settings in cf1:/bof.cfg
******************* VC Mode ********************
Configuring Network with eth-mgmt Port Setting.....
Primary config file location: ftp://*:*@10.135.24.85/./cfg/sass/dutE_vcCfg.txt
Initial DNS resolving preference is ipv4-only
Downloading 'ftp://*:*@10.135.24.85/./cfg/sass/dutE_vcCfg.txt'...OK
Sap Index file location: ftp://*:*@10.135.24.85/./cfg/sass/dutE_vcCfg.sdx
Downloading 'ftp://*:*@10.135.24.85/./cfg/sass/dutE_vcCfg.sdx'...OK
Primary image location: ftp://*:*@10.135.24.85/./img/sass/both.tim
Initial DNS resolving preference is ipv4-only
Loading image ftp://*:*@10.135.24.85/./img/sass/both.tim
Version B-11.0.S127b, Tue May
11.0S/panos/main
text:(41482848-->183530192) + data:(7134144-->49884044)
Executing TiMOS image at 0x2800000
Step 32. After the 7210 SAS device boots up, the following login prompt is
All rights reserved. All use subject to applicable license agreements.
Built on Wed Apr 20 14:32:04 IST 2011 by builder in /builder/3.0B5/panos/main
Login:
Step 33. At the prompt, enter admin for the default username and password, and
3HE 17358 AAAB TQZZA
primary-image ftp://*:*@10.135.24.85/./img/sass/both.tim
primary-config ftp://*:*@10.135.24.85/./cfg/sass/dutE_vcCfg.txt
no eth-mgmt-disabled
eth-mgmt-address 10.135.24.94/24 active
eth-mgmt-address 10.135.24.95/24 standby
eth-mgmt-route 135.0.0.0/8 next-hop 10.135.24.1
eth-mgmt-autoneg
eth-mgmt-duplex full
eth-mgmt-speed 100
wait 3
persist off
console-speed 115200
no console-disabled
vc-stack-name VC123
vc-stack-node-type cpm-imm
vc-stack-node cpmA slot-num 1 mac-addr d0:99:d5:9a:6a:41
vc-stack-node cpmB slot-num 2 mac-addr d0:99:d5:94:de:41
settings. The following console output is displayed.
displayed.
log into the 7210 SAS device.
Use subject to Terms available at: www.nokia.com
7 04:46:24 IST 2019 by sasbuild in /home/sasbuild/
© 2021 Nokia.
Appendix: 7210 SAS Boot Procedures
721