Nokia 7210 Configuration Manual page 536

System Management
Table 50
Note:
ipv4-ipv6-128-match-enable
Syntax [no] ipv4-ipv6-128-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
536
Some platforms include the value def. If the user specifies def, the software allocates
the default amount of resources based on the 7210 SAS platform. On the
7210 SAS-R6 and 7210 SAS-R12, the amount of default resources allocated also
varies based on the IMM plugged into the slot.
Values Table 50
keyword on different 7210 SAS platforms and on different IMM
types.
Number of Resources Available for ACL-SAP-Ingress
Platforms
7210 SAS-M (per node)
7210 SAS-T access-uplink mode (per
node)
7210 SAS-T network mode (per node)
7210 SAS-R6 (per IMMv1)
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
7210 SAS-R6 and 7210 SAS-R12 (per
IMM-c)
7210 SAS-Mxp (per node)
7210 SAS-Sx 1/10GE (per node)
(standalone)
7210 SAS-Sx 1/10GE (standalone-VC)
7210 SAS-S 1/10GE (per node)
(standalone)
7210 SAS-S 1/10GE (standalone-VC)
7210 SAS-Sx 10/100GE (per node)
1. The maximum value is 9 if qos-network-ingress-resource is configured as 0.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
lists the parameter values and the values used for the def
Min value
(per node)
0
0
0
0
0
0
0
0
0
0
0
0
© 2021 Nokia.
Configuration Guide
Max value Default
(per node) Values
5 5
7 3
6 3
10 2
10 3
3
1
8
10 3
6 3
5 2
6 3
5 2
4 1
3HE 17358 AAAB TQZZA