Nokia 7210 Configuration Manual page 674

System Management
Table 93
alarm-contact-input
Syntax alarm-contact-input all
Context show>alarm-contact-input
Platforms 7210 SAS-M (netowrk and access-uplink), 7210 SAS-T (network and access-uplink),
7210 SAS-Mxp, 7210 SAS-R6, and, 7210 SAS-R12
Description This command displays information of all the alarm contact input pins.
Output The following output is an example of alarm contact input information, and
the output fields.
Sample Output
*A:7210-2# show alarm-contact-input 1
===============================================================================
Alarm Contact Input
===============================================================================
===============================================================================
*A:7210-2#
*A:7210-2# show alarm-contact-input 1 detail
===============================================================================
Alarm Contact Input
===============================================================================
===============================================================================
*A:7210-2#
674
Output Fields: Chassis (Continued)
Label
Over temp
Status
Alarm Input Pin Number
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used
Alarm Input Pin Number
Alarm Input Pin Description
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used
Last State Change
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Description (Continued)
Within range — The current temperature is within the
acceptable range
Out of range — The current temperature is above the
acceptable range
Up — The specified power supply is up
Down — The specified power supply is down
: 1
: Major
: 1
:
: Major
: 05/19/2010 11:28:09
© 2021 Nokia.
Configuration Guide
Table 94 describes
3HE 17358 AAAB TQZZA