Nokia 7210 Configuration Manual page 717

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Step 10. At the prompt, press any key to initiate boot parameter updates.
Enter password to edit the Boot Options File
Or CTRL-D to exit the prompt
Waiting for 30 seconds to enter password
Password:
Step 11. At the prompt, enter the default password password, and initiate the BOF
You must supply some required Boot Options. At any prompt, you can type:
"restart" - restart the query mode.
"reboot" - reboot.
"exit" - boot with with existing values.
"diag" - enter the diag shell.
"reset" - reset the bof and reboot.
Press ENTER to begin, or 'flash' to enter firmware update...
Step 12. At the prompt, press Enter to edit the BOF. The following console output
Chassis-Role
-------------
Current chassis-role is : standalone-vc
you can change it to { satellite | standalone | factory-default }.
Press ENTER to continue OR "edit" to change the chassis-role : standalone
Press "edit" to change OR ENTER to continue :
Step 13. At the prompt, press Enter. The following output is displayed.
Chassis-role is set to standalone-vc, Do you wish to continue with this (yes/
no) :
Step 14. At the prompt, enter yes. The following console output is displayed.
VC Stack Node Type
--------------------
Current Vc Stack Node type of this card is : imm-only
Press ENTER to retain this,
or { cpm-imm } to change it to cpm-imm :
Step 15. At the prompt, enter cpm-imm. The following output is displayed.
Setting the Card role to 'cpm-imm'.
VC Stack Name
-------------
Current VC Stack Name in Bof is :
Enter the VC Stack name (max 32 characters) you wish to use : VC123
3HE 17358 AAAB TQZZA
The following console output is displayed.
edit.
The system accepts the password and the following console output is
displayed.
is displayed.
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
Appendix: 7210 SAS Boot Procedures
717