Table 62 Number Of Resources Available For Sap-Aggregate-Meter - Nokia 7210 Configuration Manual

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Table 62
qos
Syntax
qos
Context
configure>system>resource-profile
Platforms
7210 SAS-T (network and access-uplink), 7210 SAS-Mxp
Description
Commands in this context configure QoS parameters.
mbs-pool
Syntax
mbs-pool {node | port}
Context
configure>system>resource-profile>qos
Platforms
7210 SAS-T (network and access-uplink)
Description
On 7210 SAS-T, the user has an option to configure the MBS pool per node or per port. This
command allows the user to configure the MBS pool as per their requirement. A reboot is
needed whenever the value of this parameter is changed for the new values to take effect.
If the users configure a per node MBS pool, then each of the 8 queues available on a port is
allocated a CBS amount of committed buffers. The remaining amount of buffers is allocated
towards the MBS pool that is available for sharing among all the queues across all the ports
of the node. In other words the MBS pool is per node.
If the users configure a per port MBS pool, the available buffers are equally divided up among
the all the ports of the node. With this scheme of allocation, each port gets some portion of
the buffers for its exclusive use. Some of these buffers are allocated towards the CBS per
queue and the rest is assigned to the per port MBS pool. To allow operators better control
over which ports get larger portion of queue buffers, operator is provided with an option to
decommission ports. The commands associated with decommissioning of ports are only
allowed when the node is booted with the option to use per-port MBS pool. In other words,
decommission entries are executed only if the mbs-pool parameter is set to port.
3HE 17358 AAAB TQZZA
Number of Resources Available for SAP-Aggregate-Meter
Platforms
7210 SAS-S 1/10GE (per node)
(standalone)
7210 SAS-S 1/10GE (standalone-VC)
7210 SAS-Sx 10/100GE (per node)
Use subject to Terms available at: www.nokia.com
Min value
(per node)
0
0
Not
Supported
© 2021 Nokia.
System Management
Max value
Default
(per node)
Values
3
3
3
2
Not
Not Supported
Supported
561

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents