Nokia 7210 Configuration Manual page 334

System Management
The following example shows the command usage to configure an SNTP server for
unicast client mode.
Example:
The following is a sample configuration output of SNTP enabled with the server-
address command configured.
A:ALA-12>config>system>time# info
----------------------------------------------
----------------------------------------------
A:ALA-12>config>system>time#
CRON
The cron command supports the Service Assurance Agent (SAA) functions and the
ability to schedule turning on and off policies to meet "Time of Day" requirements.
CRON functionality includes the ability to specify the commands that need to be run,
when they will be scheduled, including one-time only functionality (oneshot), interval
and calendar functions, as well as where to store the output of the results. In addition,
CRON can specify the relationship between input, output, and schedule. Scheduled
reboots, peer turn ups, service assurance agent tests and more can all be scheduled
with CRON, as well as OAM events, such as connectivity checks, or troubleshooting
runs.
CRON elements include:
334
config>system>time>sntp#
config>system>time# server-address 10.10.0.94 version
1 preferred interval 100
sntp
server-address 10.10.0.94 version 1 preferred interval 100
no shutdown
exit
dst-zone PT start-date 2006/04/04 12:00 end-date 2006/10/25 12:00
zone GMT
• Action
• Schedule
• Script
• Time Range
• Time of Day
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA