Nokia 7210 Configuration Manual page 477

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
debug-save
Syntax debug-save file-url
Context admin
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command saves existing debug configuration. Debug configurations are not preserved
in configuration saves.
Parameters file-url — Specifies the file URL location to save the debug configuration.
disconnect
Syntax disconnect {address ip-address | username user-name | console | telnet | ftp | ssh |
Context admin
3HE 17358 AAAB TQZZA
Values file-url — local-url | remote-url
local-url — [cflash-id/ | usb-flash-id] [file-path]
remote url — [{ftp://} login:password@remote-location/][file-
remote-location — [hostname | ipv4-address]
usb-flash-id — uf1: (7210 SAS-M, 7210 SAS-T,
cflash-id — cf1:, cf2: (7210 SAS-T, 7210 SAS-Mxp,
netconf}
Use subject to Terms available at: www.nokia.com
255 chars maximum, including cflash-id
directory length 99 characters maximum each
path]
255 characters maximum
directory length 99 characters maximum each
ipv4-address — a.b.c.d
7210 SAS-Mxp, 7210 SAS-Sx 1/10GE:
standalone and standalone-VC, and
7210 SAS-Sx 10/100GE)
uf1:, uf1-A:, uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
7210 SAS-Sx 10/100GE, and 7210 SAS-Sx/
S 1/10GE: standalone and standalone-VC)
cf2:, cf2-A:, cf2-B: (7210 SAS-R6 and
7210 SAS-R12)
© 2021 Nokia.
System Management
477