Nokia 7210 Configuration Manual page 566

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

System Management
This command provides the flexibility to earmark resources based on the number of directly
connected interfaces required on the node, allowing the user to decrease the number of
resources for directly connected subnets and consequently increase the number of entries
available for IP routes received from peers. See the description of the
command for detailed information about IP route allocation.
Note:
Default
no max-ip-subnets (Software allocates a fixed number of entries towards this to maintain
backward compatibility with releases prior to release 7.0.R3).
Parameters
number — Specifies the number of IP subnets for directly connected IP interfaces.
Table 63
566
• Each IPv4 subnet configured on the node requires 1 entry and each IPv6 subnet
configured on the node requires 2 entries. Each IPv6 /64-bit address prefix requires
twice the amount of space needed for an IPv4 address prefix. Additionally, the user
must account for resources required for IPv6 primary and secondary addresses
assigned to an IPv6 interface.
• The number of entries available for IP routes received from a peer is equal to the total
number of L3 forwarding entries supported for the platform subtracted by the number
of entries specified by this command.
• The software allocates entries from this pool on a FCFS (first come first serve) model
based on the order of configuration of IP interfaces. An error is generated when the
maximum limit is reached.
Values
Table 63
The minimum number of IPv6 interfaces is 2.
Number of Resources Available for Maximum IP Subnets
Platforms
7210 SAS-M
7210 SAS-T
7210 SAS-R6 (IMMv1/IMMv2)
7210 SAS-R12
7210 SAS-R6 and
7210 SAS-R12 IMM-c
7210 SAS-Mxp
7210 SAS-Sx 1/10GE
(standalone and standalone-VC)
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
lists the parameter values.
Min Value
(per node)
1
1
1
1
1
1
1
© 2021 Nokia.
Configuration Guide
max-ipv6-routes
Max Value (per
Default Values
node)
16000
384
12000
500
28672
2000
28672
2000
12288
2000
28672
850
12288
2000
3HE 17358 AAAB TQZZA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents