Nokia 7210 Configuration Manual page 655

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Table 88
uptime
Syntax uptime
Context show
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays the time since the system started.
Output The following output is an example of uptime information, and
fields.
Sample Output
A:ALA-1# show uptime
System Up Time
A:ALA-1#
Table 89
3HE 17358 AAAB TQZZA
Output Fields: Synchronization (Continued)
Label
Failover Reason
Boot/Config Sync
Mode
Boot/Config Sync
Status
Last Config File Sync
Time
Last Boot Env Sync
Time
Output Fields: System Timing
Label
System Up Time
Use subject to Terms available at: www.nokia.com
Description
Displays a text string giving an explanation of the cause of the last
redundancy failover
If no failover has occurred, an empty string displays.
Displays the type of synchronization operation to perform
between the primary and secondary CSMs after a change has
been made to the configuration files or the boot environment
information contained in the boot options file (BOF)
Displays the results of the last synchronization operation between
the primary and secondary CSMs
Displays the timestamp of the last successful synchronization of
the configuration files
Displays the timestamp of the last successful synchronization of
the boot environment files
: 11 days, 18:32:02.22 (hr:min:sec)
Description
Displays the length of time the system has been up in days,
hr:min:sec format
© 2021 Nokia.
System Management
Table 89 describes the output
655