Nokia 7210 Configuration Manual page 627

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Table 77
port
Syntax port port-id [detail]
Context show>system>ptp
Platforms 7210 SAS-M (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12,
7210 SAS-Sx 10/100GE, 7210 SAS-T (network and access-uplink)
Description This command displays PTP port information.
Parameters port-id — Specifies the port ID.
detail — Displays detailed information.
Output The following output is an example of PTP port information, and
output fields.
Sample Output
A:bksim1618# show system ptp port
===============================================================================
IEEE 1588/PTP Ethernet Port Summary Information
3HE 17358 AAAB TQZZA
Output Fields: PTP Peers (Continued)
Label
Sync Interval
Local PTP Port
PTP Port State
Remote PTP Port
Clock ID
GM Clock Class
GM Clock Accuracy
GM Clock Variance
GM Clock Priority1
GM Clock Priority2
Steps Removed
Parent Clock
Values slot/mda/port
Use subject to Terms available at: www.nokia.com
Description
Displays the configured sync interval value
Displays the local PTP port
Displays the PTP port state
Displays the PTP port number at the remote end
Displays the clock identity value of the local PTP clock
Displays the grand master clock class
Displays the grand master clock accuracy designation
Displays the grand master clock variance
Displays the grand master clock priority1 designation
Displays the grand master clock priority2 designation
Displays the number of hops from GM
yes — if the peer is the chosen parent clock
no — if the peer is not the chosen parent clock
© 2021 Nokia.
System Management
Table 78 describes the
627