Nokia 7210 Configuration Manual page 282

System Management
Table 31
The 7210 SAS communicates with peer 1588v2 clocks, as shown in
These peers can be ordinary clock slaves or boundary clocks. The communication
can be based on either unicast IPv4 sessions transported through IP interfaces or
Ethernet multicast PTP packets transported through an Ethernet port.
Figure 25
IP/UDP unicast and Ethernet multicast support for the 7210 SAS platforms is listed
in
Note: PTP is supported on all 7210 SAS platforms as described in this document, except
the 7210 SAS-Sx 10/100GE and 7210 SAS-Sx/S 1/10GE operating in standalone-VC
mode. See
the configuration guidelines and restrictions.
282
• ordinary clock
• boundary clock
• end-to-end transparent clock
• peer-to-peer transparent clock
lists the 7210 SAS platform support for the different types of PTP devices.
Peer Clocks
Boundary Clock
10.3.1.1
Configured Peers
Discovered Peers
Ordinary Clock
Slave
10.1.1.1
Table 34.
Configuration Guidelines and Restrictions for PTP
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
7210 SAS
10.0.1.1
Peer 10.3.1.1
Peer 10.4.1.1
© 2021 Nokia.
Configuration Guide
Figure 25.
Ordinary Clock
Master
10.4.1.1
Ordinary Clock
Slave
10.2.1.1
sw0393
for a list of PTP profiles, and
3HE 17358 AAAB TQZZA