Nokia 7210 Configuration Manual page 19

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 17358 AAAB TQZZA
• access-uplink
In the access-uplink operating mode, the 7210 SAS router uplinks to the network
using Layer 2 Ethernet VLAN switching (without IP/MPLS).
Platforms Supported: 7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F1C2T,
7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C, 7210 SAS-M, and 7210 SAS-T
• network
In the network operating mode, the 7210 SAS router uses IP/MPLS uplinks to
the network. The IP routing protocols and MPLS functionality is available; refer
to the appropriate 7210 SAS software user guide for more information about
supported features.
Platforms Supported: 7210 SAS-K 2F6C4T, 7210 SAS-K 3SFP+ 8C,
7210 SAS-M, 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/
S 1/10GE, 7210 SAS-Sx 10/100GE, and 7210 SAS-T
• satellite
In the satellite operating mode, the 7210 SAS platform uses high-capacity
uplinks (for example, 10GE ports on the 7210 SAS-Mxp and 100GE ports on the
7210 SAS-Sx 10/100GE) to connect to the 7750 SR host. The 7210 SAS router
is managed by the 7750 SR host. There is no direct CLI access to the satellite
node, and all services and protocols are configured on the host.
Platforms Supported: 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, and
7210 SAS-Sx 10/100GE
• standalone
In the standalone operating mode, the 7210 SAS platform supports IP/MPLS
uplinks. It is operated and managed independently.
The functionality and features available on the standalone 7210 SAS platform
are similar to the network
used to differentiate between a node being managed by the 7750 SR host (in
the satellite operating mode), and a node managed independently (standalone
operating mode).
Platforms Supported: 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, and
7210 SAS-Sx 10/100GE
• standalone-VC
In the standalone-VC operating mode, a set of 7210 SAS devices are stacked
to provide larger 1GE/10GE port density and control-plane redundancy. The
stack of nodes is provisioned and managed as a single chassis, and not as
individual nodes.
The functionality and features available on the 7210 SAS platform are similar to
the network operating mode, with additional capabilities, such as control-plane
redundancy with non-stop routing and non-stop services.
Platforms Supported: 7210 SAS-Sx/S 1/10GE
Use subject to Terms available at: www.nokia.com
operating mode. The standalone mode is primarily
© 2021 Nokia.
Getting Started
19