Nokia 7210 Configuration Manual page 596

System Management
Table 70
ntp
Syntax ntp [{peers | peer peer-address} | {servers | server server-address} |[all]] [detail]
Context show>system
Platforms Supported on all 7210 SAS platforms as described in this document
Description This command displays NTP protocol configuration and state.
Output The following output is an example of NTP information, and
fields.
Sample Output
A:7210>config>system>time>ntp# show system ntp
===============================================================================
NTP Status
===============================================================================
Enabled : Yes Stratum : 3
Admin Status : up Oper Status : up
Server enabled : No Server keyId : none
System Ref Id : 192.168.15.221 Auth Check : Yes
===============================================================================
A:7210
A:7210# show system ntp all
===============================================================================
NTP Status
===============================================================================
Configured : Yes Stratum : 1
Admin Status : up Oper Status : up
Server Enabled : Yes Server Authenticate : No
Clock Source : PTP
Auth Check : Yes
Current Date & Time: 2013/03/19 20:18:50 UTC
===============================================================================
===============================================================================
NTP Active Associations
===============================================================================
State Reference ID St Type A Poll Reach Offset(ms)
Remote
596
Output Fields: Memory Pool (Continued)
Label
In Use
Current Total Size
Total In Use
Available Memory
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Description
The current amount of the memory pool currently in use
The sum of the Current Size column
The sum of the In Use column
The amount of available memory
© 2021 Nokia.
Configuration Guide
Table 71 describes the output
3HE 17358 AAAB TQZZA