Nokia 7210 Configuration Manual page 629

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Table 78
statistics
Syntax statistics
Context show>system>ptp
Platforms 7210 SAS-M (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12,
7210 SAS-Sx 10/100GE, 7210 SAS-T (network and access-uplink)
3HE 17358 AAAB TQZZA
Output Fields: PTP Port
Label
Port Summary
Port
PTP Adm/Opr
PTP State
Tx Rate
Rx Rate
Port Information
Port
PTP Admin State
PTP Oper State
Local MAC Addr
Multicast MAC Addr
Cfg Sync Rate
Cfg Delay Req Rate
Master-Only
G.8275.1 Priority
PTP Port Number
PTP Port State
Neighbors
Timestamp Point
Use subject to Terms available at: www.nokia.com
Description
Displays the port numbers
Displays the admin and oper state
Displays the PTP state for each port: initializing, listening,
uncalibrated, slave, master, or passive
Displays the Tx rate for each port
Displays the Rx rate for each port
Displays the PTP port number
Displays the PTP administrative state of the port
Displays the PTP operational state of the port
Displays the local MAC address of the port
Displays the multicast MAC address of the port
Displays the configured sync packet rate
Displays the configure delay request packet rate
Displays the master-only command value: true or false
Displays the configured priority value
Displays the internal port number associated with this port
Displays the PTP port state: disabled, listening, slave, master,
passive, or faulty
Displays the number of neighbors
Displays the point at which time-stamping is done
© 2021 Nokia.
System Management
629