Nokia 7210 Configuration Manual page 163

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Enter ip route: xx.xxx.x.x/16 next-hop xx.xxx.xx.x
A route to that subnet already exists.
Would you like to add a static route? (yes/no) n
Would you like to add a static IPv6 route? (yes/no) n
Current configuration enables use of console (setting is "no console-disabled")
Press ENTER to proceed with existing setting or 'disable' to disable console access:
New Settings
------------
#eth-mgmt Port Settings:
#System Settings:
Do you want to overwrite cf1:/bof.cfg with the new settings? (yes/no): y
Successfully saved the new settings in cf1:/bof.cfg
Configuring Network with eth-mgmt Port Setting.....
Primary config file present at: uf1:\SASR2553.cfg
Sap Index file present at: uf1:\SASR2553.sdx
Primary image location: ftp://*:*@xxx.xxx.xx.xxx/tmp/sasr/b/
Initial DNS resolving preference is ipv4-only
Loading image ftp://*:*@xxx.xxx.xx.xxx/tmp/sasr/b/cpm.tim
Version C-6.1.R3, Wed Jun
panos/main
text:(35757600-->121586864)
telnet>
4.10.3.2.3
The following is a sample output of a manually interrupted boot sequence on the
7210 SAS-Sx/S 1/10GE.
primary-image
#eth-mgmt Port Settings:
#uplinkA Port Settings:
3HE 17358 AAAB TQZZA
primary-image
ftp://*:*@xxx.xxx.xx.xxx/tmp/sasr/b/
secondary-image
cf1:\
tertiary-image
uf1:\
primary-config
uf1:\SASR2553.cfg
secondary-config
uf1:\SASR2553.cfg
tertiary-config
cf2:\SASR2553.cfg
no
eth-mgmt-disabled
eth-mgmt-address
xx.xxx.xx.xx/24 active
eth-mgmt-address
xx.xxx.xx.xx/24 standby
eth-mgmt-route
x.x.x.x/24 next-hop xx.xxx.xx.x
eth-mgmt-route
x.x.x.x/24 next-hop xx.xxx.xx.x
eth-mgmt-route
xx.xxx.x.x/16 next-hop xx.xxx.xx.x
eth-mgmt-route
xxx.x.x.x/8 next-hop xx.xxx.xx.x
eth-mgmt-autoneg
eth-mgmt-duplex
full
eth-mgmt-speed
100
wait
3
persist
off
console-speed
115200
no
console-disabled
Sample Output: BOF Configuration on Bootup for 7210 SAS-Sx/S 1/
10GE
cf2:both.tim
eth-mgmt-disabled
uplinkA-port
1/1/25
no
uplinkA-autoneg
Use subject to Terms available at: www.nokia.com
4 10:32:00 IST 2014 by builder in /home/builder/6.1B1/R3/
© 2021 Nokia.
Boot Options
163

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents