Accessing Plc By Gx Configurator-Qp - Mitsubishi Electric GOT2000 Series Connection Manual

22.7.6

Accessing PLC by GX Configurator-QP

The following shows the procedure to set the FA transparent function of GX Configurator-QP.
Step 1.
Click [Connection setup] for [Online] on GX Configurator-QP.
Step 2.
The [Connection setup] is displayed.
Step 3.
Set the following in [PC] of the [Connection setup] dialog.
Interface: USB
Step 4.
Set the [PLC side] in [Connection setup].
PLC type: Q series PLC type
Multi PLC specification: None/No.1 to 4
Direct CPU connection, mark the [via GOT transparent mode] checkbox.
Bus connection
Interface: PLC
Type: Bus
Direct CPU connection
Interface: PLC
Type: Direct coupled
Computer link connection
Interface: C24
(For bus connection only)
22 - 116
22.7 Personal Computer Side Setting