22.6 GOT Side Settings
22.6.1
Setting communication interface
■1. Controller setting
Set the channel of the connected equipment.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set Manufacturer, Controller Type, I/F, and Driver according to the connected equipment to be used.
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
Click the [OK] button when settings are completed.
■2. Communication setting with personal computer
Set the communication setting between the GOT and the personal computer.
For details of the setting contents, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
Step 1.
Select [Common]
Step 2.
The [PC (Data Transfer)] is displayed. Set the interface of the GOT to be used in the communication with
the personal computer.
2.
[Controller Setting] from the menu.
POINT
POINT
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠
1.1.3 I/F communication setting
[Peripheral Setting]
3.
4.
Click!
[PC(Data Transfer) ]from the menu.
22.6 GOT Side Settings
22
22 - 55