22.7.2
Accessing by CW Configurator
The following shows the procedure to set the FA transparent function of CW Configurator.
■1. When connecting the GOT and the personal computer by USB
(1) Connecting the GOT and PLC in Ethernet connection
Step 1.
Click [Online]
Step 2.
[Connection Channel Setup] is displayed.
Step 3.
Set [Connection Channel Setup].
PC side I/F: USB
PLC side I/F: GOT
Other Station Setting: No Specification
[Connection Destination] on CW Configurator.
22.7 Personal Computer Side Setting
22
22 - 83