22.7.16 Accessing by NC Configurator2
The following shows the procedure to set the FA transparent function of NC Configurator2.
Step 1.
Click [Communicate]
Step 2.
Depending on the connect pattern, set one of the following in the [Connect pattern].
USB-GOT (Ethernet-CNC Unit)
USB-GOT (Ethernet-Ethernet Unit)
USB-GOT (Ethernet-Sequencer CPU Unit)
USB-GOT (Q Mode)
Step 3.
Set as necessary [IP address], [Network No.] and [Station No.].
Step 4.
check that the GOT is correctly connected to the CNC in [Test].
[Communication settings]
22.7 Personal Computer Side Setting
[C70 series]
[USB].
22
22 - 143