Optional) Installing A Sliding Door Magnetic Lock - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
If any of the preceding conditions is not met, the magnetic lock fails to attract the magnet.
Troubleshoot the magnet as follows:
1.
2.
3.
4.
Figure 8-40 Adjusting the gap
----End

8.8.6 (Optional) Installing a Sliding Door Magnetic Lock

Context
The BOM number for a sliding door magnetic lock is 02070037. The following components
are required for installing a magnetic lock.
Issue 01 (2017-07-30)
Check the circuit and rectify any circuit fault.
Adjust the magnet base and the door panel to align the magnetic lock with the magnet
face-to-face. Ensure that the deviation is minimum.
If a gap exists between the revolving door magnetic lock and the magnet, rectify the fault
as shown by (1) in Figure
If the magnet is not level, rectify the fault as shown by (2) in
magnet levelness.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-40.
8 Installing Monitoring Devices
Figure 8-40 to adjust the
149