Installation Environment Requirements - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
Step 5 Sign on the Packing List with the customer after verifying that all required items are
delivered.
Step 6 Store the items properly.
----End
Follow-up Procedure
Put the items to be installed immediately onto an ESD surface, such as a polyethylene (PE)
bag or an expandable polyethylene (EPE) foam. Pack the items not to be installed
immediately with their original packing materials. Put them in a dry and cool environment
without exposure to sunlight or electromagnetic radiation.

1.3 Installation Environment Requirements

Ensure that the installation environment meets the requirements before installation.
Table 1-1 Installation environment checklist
Check Item
Floor bearing
capacity
Equipment room net
height
Device passage and
door height and
width
Floor levelness
Elevator
Cable tray
Issue 01 (2017-07-30)
Requirement
 Standard live load of the equipment
room: 8–12 kN/m
cabinet is contained in the module,
use the standard live load of the
equipment room as a reference.)
 Suspended load of the equipment
room: 1.2 kN/m
 Standard live load of the UPS room:
8–10 kN/m
 Standard live load of the battery
room: 16 kN/m
 Standard live load of the monitoring
center: 6 kN/m
See the field requirements for details.
Height ≥ 2.2 m and width ≥ 1.2 m
Allowed deviation: 3 mm/2000 mm
 Elevator bearing capacity > 1.5 t
 Inner dimensions: height > 2.4 m or
depth > 2.7 m
Preinstalled in the equipment room for
signal cables and power cables
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
(If the battery
2
2
2
2
1 Installation Preparations
Check Result
□ Compliant
□ Incompliant
□ Compliant
□ Incompliant
□ Compliant
□ Incompliant
□ Compliant
□ Incompliant
□ Compliant
□ Incompliant
□ Compliant
□ Incompliant
3