Optional) Installing A Smoke Detector; Optional) Installing The Multi-Functional Sensor - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)

8.7.2 (Optional) Installing a Smoke Detector

Context


Procedure
Step 1 Secure the smoke detector base to the appropriate hole in the control skylight using M3x10
screws.
Figure 8-24 Installing the smoke detector
Step 2 Align the mounting holes in the smoke detector and its base, and then rotate the smoke
detector until it is secured.
----End

8.7.3 (Optional) Installing the Multi-Functional Sensor

Context
The BOM number of a multi-functional sensor is 33010477.
Procedure
Step 1 Align the holes in the mounting base for the multi-functional sensor with the holes in the
control skylight, and use two M3x10 screw assemblies to secure the mounting base to the
control skylight.
Step 2 Route the cables of the multi-functional sensor through the cable holes in the control skylight.
Step 3 Secure the multi-functional sensor to the mounting base.
Issue 01 (2017-07-30)
The screws for installing a smoke detector are located in the fitting bag of the supporting
object. For example, the screws for installing the smoke detector on the control skylight
are located in the fitting bag of the control skylight.
Prior to installing the smoke detector, properly connect the detector cables to avoid
unnecessary rework.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing Monitoring Devices
138