Attaching Cabinet Labels - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
Step 8 Adjust the positions of the door box fasteners.
After the door box gap is adjusted, the door box is lifted, and its fasteners may not be able to
touch the cabinet top. You need to adjust the positions of the door box fasteners to secure the
door box to the cabinet top.
1.
2.
3.
Step 9 Secure the door box to the cabinet using six M5 screws, as shown by (4) in
If the door box rubs against the fixing screws in the top panel of the cabinet, remove the
screws in the top panel, and secure the top panel and the door box to the cabinet using the
screws.
----End

5.3 Attaching Cabinet Labels

Prerequisites
Skylights and end doors are secured.
Issue 01 (2017-07-30)
Figure 5-37 Adjusting the Λ-shaped gap
Loosen the two screws on a door box fastener but do not remove them, as shown by (2)
in Figure 5-37.
Lower the fastener until it touches the cabinet, as shown by (3) in
Tighten the screws to secure the fastener.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing the Contained Aisles
Figure 5-37.
Figure 5-37.
107