Optional) Installing A Revolving Door Magnetic Lock - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
Figure 8-33 Installing an alarm beacon
----End

8.8.5 (Optional) Installing a Revolving Door Magnetic Lock

Context
The BOM number for a revolving door magnetic lock is 02070037.
Procedure
Step 1 Remove the cover of the magnetic lock. The cover of the magnetic lock is located under the
mounting kit above the door. If no magnetic lock is configured, the cover is used to cover up
the magnetic lock installation position. If a magnetic lock is configured, remove the cover and
install the magnetic lock.
1.
2.
3.
Issue 01 (2017-07-30)
After a magnetic lock is installed, the cover can be discarded.
Remove the cover at the rear of the mounting kit above the door, remove the four screws
at the bottom of the mounting kit, and keep the screws aside.
Remove the mounting plate of the magnetic lock cover.
Remove the four screws on the mounting plate of the magnetic lock cover, and remove
the cover of the magnetic lock.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing Monitoring Devices
145