Installing An Ic Card Reader - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
Figure 8-47 Installing a card reader with a keypad
Step 2 Secure the baffle plate with the cable hole in the middle to the pad mounting kit using the M4
nuts, spring washers, and flat washers, as shown by (2) in
Step 3 Remove the M2x5 screws (set aside) of the card reader with a keypad and take off the
baseplate, as shown by (3) and (4) in
Step 4 Secure the baseplate to the baffle plate using two M3x8 countersunk screws, as shown by (5)
in Figure
Step 5 Route the cable of the card reader with a keypad through the cable hole in the baffle plate, as
shown by (6) in
Step 6 Secure the card reader with a keypad to the baseplate, as shown by (7) and (8) in
----End

8.8.8.4 Installing an IC Card Reader

Context
The BOM number of an IC card reader is 06080327.
Procedure
Step 1 Remove the M4 nuts, spring washers, and flat washers (set aside) from the baffle plate in the
target installation position and remove the baffle plate, as shown by (1) in
Issue 01 (2017-07-30)
Keep the protruding plane of the baffle plate flush with the end plane of the pad mounting kit.
8-47.
Figure 8-47.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 8-47.
8 Installing Monitoring Devices
8-47.
Figure
Figure 8-48.
8-47.
156