Huawei FusionModule2000 Installation Manual page 128

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
Figure 7-6 Installing a supporting plate
Step 5 Install a partition plate. Press both sides of the V-shaped partition plate with hands to decrease
the angle to a proper degree, and clamp the clasps at the bottom into the square holes near the
partition plate, as shown in
in the middle. In actual conditions, you can select appropriate square holes as required.)
Figure 7-7 Installing a partition plate
Step 6 Install adjacent cable troughs in the same way.
Step 7 Rotate the interconnecting wrench and clamp it into the clasps until the wrench is horizontal,
as shown in
Issue 01 (2017-07-30)
Figure 7-7. (By default, insert the clasps into the two square holes
Figure 7-8. This operation interconnects the cable troughs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 (Optional) Installing Cable Troughs
119