Deploying 600 Mm Wide Bases For Pdcs - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
Figure 3-15 600 mm wide fixed base

3.1.2.3 Deploying 600 mm Wide Bases for PDCs

Context
600 mm wide adjustable bases are used for PDCs. The BOM number for the bases is
21151128.
Figure 3-16
Figure 3-16 600 mm wide adjustable base (used for a PDC)


Issue 01 (2017-07-30)
shows a 600 mm wide adjustable base.
When deploying the base, place the side marked FRONT facing the aisle containment.
Move the adjustable feet of the PDC base to the cabinet rear (close to the rear door of the
cabinet).
This section illustrates how to adjust the feet of the adjustable base in the hot aisle containment scenario
where the rear door of the PDC will be on the base side with the FRONT label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation Preparations
28