Huawei FusionModule2000 Installation Manual page 157

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
1.
2.
When securing the magnetic to the door panel, do not over-tighten the screws so that the white rubber
washer is elastic. The washer will adjust the magnetic to a correct position because of its elasticity.
Figure 8-39 Installing the magnet
(1) White rubber washer
Step 7 (Optional) Adjust the magnet.
If the magnet does not work properly after power-on, check that:
1.
2.
3.
Issue 01 (2017-07-30)
Take out the magnet from the magnetic lock fitting bag, and knock the positioning pins
of the magnetic into the magnet using a rubber mallet.
Figure 8-38 Installing positioning pins of the magnetic
Insert the assembled magnet into the magnetic lock base on the revolving door, and
secure the magnet to the door using the screws on the door and the white washer
delivered with the magnet lock.
The magnet provides magnetic force by attaching magnetizable iron parts to it.
The revolving door magnetic lock is aligned with the magnet face-to-face.
No gap exists between the revolving door magnetic lock and the magnet.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing Monitoring Devices
148