Installing An Actuator Or Converter - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)

8.8.3 Installing an Actuator or Converter

Context


Table 8-1 Names and BOM numbers of monitoring actuators and converters
Name
AC actuator
Access
actuator
WiFi
converter
Skylight
actuator
Procedure
Step 1 Remove the fastener, remove M4 screws, and take off the rear plate.
Issue 01 (2017-07-30)
This section describes how to install a monitoring actuator and converter. For the specific
component names and BOM numbers, see
The monitoring components mentioned in this section can be installed in the same way.
The WiFi converter is used as an example.
BOM
Number
52271876
52271874
50100888
52271875
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 8-1.
Description
Install it at the upper frame mounting kit for the PDC in
the smart module.
Install it at the upper frame mounting kit for the PDC or
network cabinet in the smart module.
Install it at the upper frame mounting kit for the PDC in
the smart module. Use it with the WiFi antenna (BOM
number: 27012015).
If one skylight actuator is configured, install it in the
upper frame mounting kit for the network cabinet in the
smart module. If two skylight actuators are configured,
install them in the upper frame mounting kits for the
front and rear end doors respectively.
8 Installing Monitoring Devices
141