Huawei FusionModule2000 Installation Manual page 159

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
Figure 8-41 Components of a sliding door magnetic lock
(1) Magnetic lock fastener
(3) Magnet
(5) Magnet washer
Procedure
Step 1 Secure the magnet fastener and magnet washer to both sides of the sliding door using two M6
screws.
Step 2 Secure the magnet to the magnet fastener using the screws and washers available in the fitting
bag of the sliding door magnetic lock.
Step 3 Take out the magnetic lock and disassemble it, and keep the two screws aside.
Step 4 Secure the disassembled magnetic lock to the magnetic lock fastener using the screws
removed in the previous step.
Step 5 Secure the assembly of the magnetic lock and magnetic lock fastener to the guide rail using
three M4 screws.
Issue 01 (2017-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing Monitoring Devices
(2) Magnetic lock
(4) Magnet fastener
150