Installing A Fingerprint And Card Reader - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
No.
4
5
6
7
8
9

8.8.8.1 Installing a Fingerprint and Card Reader

Context
The BOM number of a fingerprint and card reader is 02070173.
Procedure
Step 1 Remove the M4 nuts, spring washers, and flat washers (set aside) from the baffle plate in the
target installation position and remove the baffle plate, as shown by (1) in
Issue 01 (2017-07-30)
Name
Pad power connector
holder
M5x10 tapping screw
M4x12 screw assembly
M3x8 countersunk screw
M3x8 screw
Cable baffle
When securing monitoring components to the pad mounting kit, do not use the screws delivered with the
monitoring components.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing Monitoring Devices
Description
Used for securing the pad power connector.
Used for securing the pad mounting kit.
Used for securing the pad power connector
holder.
Used for securing the baseplate of the
fingerprint and card reader, the fingerprint
and card reader with a keypad, or the card
reader with a keypad.
Used for securing the IC card reader.
Used for covering monitoring cables.
Figure 8-45.
153