Cisco ONS 15454 Hardware Installation Manual page 288

DLP-G293 Install Timing Wires in ONS 15454 M2 - ETSI
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Locate the timing BITS connectors in the DC-2E or AC-2 Power Module, as shown in the following two
figures.
Cisco ONS 15454 Hardware Installation Guide
258
75-ohm coaxial cable with a DIN 1.0/2.3 miniature coax connector. The PID for
the BITS IN/OUT cable is 15454-M-TMGCBL=.
None
As needed
Onsite
None
Installing the ONS 15454 M2 Shelf