Dlp-G592 Install The Ac Power Module In The Ons 15454 M2 Shelf - Cisco ONS 15454 Hardware Installation Manual

Installing the ONS 15454 M2 Shelf
Note During the system startup or fan-tray replacement, the inventory data of the fan-tray assembly and the power
module is displayed in the Inventory tab of CTC after a delay of approximately 6 minutes.
Procedure
Step 1
Complete the necessary task as applicable:
•
•
Step 2 Complete the
Stop. You have completed this procedure.

DLP-G592 Install the AC Power Module in the ONS 15454 M2 Shelf

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1
Insert the AC power module in Slot A.
DLP-G592 Install the AC Power Module in the ONS 15454 M2 Shelf, on page 231
DLP-G593 Install the DC Power Module in the ONS 15454 M2 Shelf, on page 233
NTP-G271 Install the Power and Ground to the ONS 15454 M2 Shelf, on page
This procedure installs the AC power module in the ONS 15454 M2 system.
#2 Phillips screwdriver
• NTP-G266 Install the ONS 15454 M2 Shelf, on page
• Connect the chassis to the office ground. For detailed instructions on how
to ground the chassis, refer to the
Guide for Cisco CPT and Cisco ONS Platforms
Required
Onsite
None
DLP-G592 Install the AC Power Module in the ONS 15454 M2 Shelf
Electrostatic Discharge and Grounding
Cisco ONS 15454 Hardware Installation Guide
239.
194.
.
231