Dlp-G31 Install The Flexlayer Modules - Cisco ONS 15454 Hardware Installation Manual

DLP-G31 Install the FlexLayer Modules

DLP-G31 Install the FlexLayer Modules
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1
Determine the FlexLayer modules that you want to install in the FlexLayer shelf. The FlexLayer shelf can
house up to four Add/Drop FlexLayer modules or four Y-cable splitter modules. The following table lists the
two-channel FlexLayer modules and part numbers.
Table 23: ONS 15xxx Two-Channel Add/Drop FlexLayer Module Hardware Part Numbers
Part Number
15216-FLB-2-31.1=
15216-FLB-2-32.6=
15216-FLB-2-35.0=
15216-FLB-2-36.6=
15216-FLB-2-38.9=
15216-FLB-2-40.5=
15216-FLB-2-42.9=
15216-FLB-2-44.5=
15216-FLB-2-46.9=
15216-FLB-2-48.5=
15216-FLB-2-50.9=
15216-FLB-2-52.5=
15216-FLB-2-54.9=
15216-FLB-2-56.5=
Cisco ONS 15454 Hardware Installation Guide
128
This task installs the FlexLayer modules in the FlexLayer shelf. You can only
install two-channel FlexLayer modules.
#2 Phillips Dynamometric screwdriver
FlexLayer modules
None
As needed
Onsite
None
Description
ITU-100 GHz 2 Ch, FlexMod - 1530.33 and 1531.12
ITU-100 GHz 2 Ch, FlexMod - 1531.90 and 1532.68
ITU-100 GHz 2 Ch, FlexMod - 1534.25 and 1535.04
ITU-100 GHz 2 Ch, FlexMod - 1535.82 and 1536.61
ITU-100 GHz 2 Ch, FlexMod - 1538.19 and 1538.98
ITU-100 GHz 2 Ch, FlexMod - 1539.77 and 1540.56
ITU-100 GHz 2 Ch, FlexMod - 1542.14 and 1542.94
ITU-100 GHz 2 Ch, FlexMod - 1543.73 and 1544.53
ITU-100 GHz 2 Ch, FlexMod - 1546.12 and 1546.92
ITU-100 GHz 2 Ch, FlexMod - 1547.72 and 1548.51
ITU-100 GHz 2 Ch, FlexMod - 1550.12 and 1550.92
ITU-100 GHz 2 Ch, FlexMod - 1551.72 and 1552.52
ITU-100 GHz 2 Ch, FlexMod - 1554.13 and 1554.94
ITU-100 GHz 2 Ch, FlexMod - 1555.75 and 1556.55
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf