Cisco ONS 15454 Hardware Installation Manual page 322

Hide thumbs Also See for ONS 15454:

Table of Contents

DLP-G769 Install Air Plenum for ONS 15454 M6 Shelf in ETSI Configuration

Figure 195: Installing the right vertical air plenum

Place the horizontal plenum above the chassis slot in the ETSI cabinet.

Install the wing head screws provided with the kit, and tighten to a torque value of 11.5 in-lb (1.3 N-m)..

Figure 196: Installing the horizontal air plenum above the vertical plenums

Install the standard brackets on both sides of the chassis in front position. See

Brackets on the ONS 15454 M6 Shelf for ETSI Rack Configuration, on page

Check the length between the top and bottom horizontal air plenums where the chassis will be installed. The

length must be not less than 10.5 inches (267 mm). If the length is less, adjust the position of the top horizontal

Cisco ONS 15454 Hardware Installation Guide

Installing the ONS 15454 M6 Shelf

DLP-G562 Mounting the